Waving Arm Christmas Wiper Decals

Description

What’s this? It’s the perfect design for the Halloween and Christmas holiday seasons! Universal size fits any lower-mounted rear wiper but can also be mounted on the top (upside down) or side. The arm is reversible (double-sided) for the left or right side. Both decal and WiperTags are removable/detachable and UV-protected against fading. The window decal is also laminated for additional protection.

Approximate measurements:

• Arm 8.5″ L x 2″ W (double sided L/R)
• Decal 8.5″ W x 8.5″ H

Simple installation:

• Clean and dry the rear window and wiper thoroughly.
• Attach the waving arm to the wiper according to the instructions on the packaging. You will be able to adjust slightly left or right as necessary.
• Before removing the back of the decal, align it to the correct side of the wiper for positioning. If needed, you can trim the decal to fit around the wiper arm if yours is mounted through the window.
• Remove the decal backing, align the level with minimal touching on the adhesive, and from the bottom up gently lay the decal on the window pushing out any wrinkles on the way up. Remove and realign if needed. Save the paper backing if you want to reuse it each season.
• Follow up by using a credit card or something thin and flexible to push any wrinkles or bubbles toward the outside of the decal.
• Keep your wiper blades free of dirt and debris to get the most from your decal. Remove the WiperTag arm before entering a car wash.
• To remove the decal, ensure it is not freezing or could tear. Remove indoors or warm with a blow dryer. Make sure your hands, window, and decal are clean and dry. Simply pick off an edge and slowly peel it off, then apply it back to the original paper. Remove the WiperTag arm by tilting it sideways and unlocking it. The number of times the decal can be reused varies depending on how well it is taken care of.